Dynamic High Performance Bandsaw Machine





New technologies

  • AMADA’s dynamic frame
    Highly rigid frame that includes a newly engineered posted design.
  • New CNC control makes setting up new jobs simple
    The control offers 3 cut modes for maximum efficiency depending on work volume and time. Offering “Eco-mode”, “Standard-mode” and “Power-mode”.
  • Double vibration dampening rollers
    With double rollers the vibrations are reduced resulting in faster, quieter cutting. Reduced vibration also provides for longer blade life and better surface finishes.
  • New saw blade frame design results in longer blade life
    By lessening the twist in the blade, fatiguing is greatly reduced leading to longer blade life.
  • AMADA’s dynamic frame
    AMADA’s dynamic frame
  • Screen

Easy to operate and very functional

  • Automatically adjusting wire brush
    Reduces adjustment time and assures accurate placement.
  • Open top longer feed stroke vise
    700mm rear feed vise stroke length with full roller type table for convenient material loading.
  • Non-contact material positioning
    Auto trim function using laser beam to detect the material position shortening run times.
  • Open top longer feed stroke vise
    Open top longer feed stroke vise

Improved working environment

  • Smart blade change
    Blade support holder makes changing blades much easier.
  • Chip flusher
    Chip flushing design helps to keep the machine clean in areas that used to be hard to clean.
  • Burr remover
    Unique design under the cutting area helps to reduce any resulting burrs.
  • Position the remnant into the best location
    Automatically measures weight and balance of the remnant material and then positions the remnant into the best location to sling it.
  • Discharge table
    The discharge table, too, has a retractable device allowing easier overhead material removal.
  • Chip flusher
    Chip flusher
  • Discharge table
    Discharge table

Environmental improvement

  • Increase material yield by new vise
    A new rear vise design reduces the remnant length to 35mm plus the length of the part improving the yield out of every bar cut.
  • LED work light
    New LED work light conserves energy, lasts 8x longer and provides a much brighter cutting environment.
  • Automatic cutting fluid supply
    AUtomatically supplies cutting fluid only when the machine is cutting using less energy.
  • SMARTCUT BAND (Option)
    SMARTCUT BAND (optional) saves material loss and increases yield.
  • A new rear vise design
    A new rear vise design
  • New LED work light
    New LED work light



Cutting capacity (mm) Round (Diameter) φ30 - 430 φ30 - 530
Rectangle (W x H) □30 - 430 □30 - 530
Min. cut-off length 10 10
Min. remnant length 35 35
Blade size (W x T x L) (mm) 41 x 1.3 x 5300 54 x 1.6 x 5920
Blade speed (m/min) 15 - 120 15 - 120
Motors (kW) Blade 5.5 7.5
Hydraulic pump 1.5 1.5
Coolant pump 0.18 0.18
Wire brush 0.09 0.09
Power requirement (kVA) 13 15
Feeding vise stroke length (mm) 700 700
Tank capacity (L) Hydraulic 20 20
Coolant 68 68
Table height (mm) 700 700
Allowable load (Mass of work) (kg) 3000 4600
Machine dimensions (W x L x H) (mm) 2520 x 2180 x 2020 2800 x 2180 x 2221
Mass of machine (kg) 3500 4500



These specifications and machinery and equipment appearance are subject to change without notice for reason of improvement.
This products is for Japan domestic market.

Back To Top