Product

Hyper Saw
HPSAW-310

HPSAW-310

 

Features

stable super high speed cutting

  • Reducing the load to the blade body and by making the twisting angle of the blade to 0°, the fatigue life of the blade body is prolonged and the running speed of the blade is increased dramatically.
  • To deal with the huge cutting resistance generated by super high speed cutting, the saw head frame and the guide were newly designed. For bridge type saw head frame, deflection generated when the blade is stretched with strong tension is designed optimized by the optimum stress distribution technique.
  • Vibration reduction rollers are mounted on the blade guides of both sides, with combination of high pressure coolant that plays the role of liquid damper, vibration of the blade that is running at high speed is largely restrained.
  • *The cover is an exhibition specification.
  • Twist angle of blade: 0°
    Twist angle of blade: 0°
  • Highly rigid double gates type guide
    Highly rigid double gates type guide
  • Structure analysis of bridge type saw head frame
    Structure analysis
    of bridge type saw head frame

High speed / high precision mechanism

  • An AC servo motor and a linear guide are adopted for the material feeding mechanism.
  • Both high speed material feeding and high precision positioning for cutting are achieved simultaneously.

Improve quality

  • The high pressure coolant forcibly cools the heat generated at super high speed cutting.
  • Rotation speed of the wire brush is adjusted automatically. Defective cut section due to chips is prevented by removing chips adhered to the blade running with high speed.
  • Noncontact type, high quality cutting bending detectors are mounted on the blade guides of the both sides. Cutting bending is measured highly precisely in real time.
  • Linear guides are used to support and guide the front main vise. Wear and maintenance is reduced while also improving stability of the vise. Material is always clamped firmly.
 
High pressure coolant

High pressure coolant

Opening and closing vise with linear guide

Opening and closing vise with linear guide

 

Automation Systemization

Material carrying-in system and product carrying-out system (option)

  • Working rate is significantly increased by automation and systematization of "material carrying-in", "cutting", and “product carrying-out/sorting". Reduction of load to workers and long time automatic operation are achieved.
Material carrying-in system and product carrying-out system (option)

Discharge of chips and collection of cutting oil solution

  • Large amount of chips generated during the super high speed cutting and are treated automatically.
Discharge of chips and collection of cutting oil solution
Discharge of chips and collection of cutting oil solution

 

Specifications

HPSAW-310
Cutting capacity (mm) Round (Dia) φ50 - φ310
Rectangle (W x H) 50 x 50 - 310 x 310
Cut-off length (mm) 10 - 600*
Blade size (W x T x L) (mm) 67 x 1.6 x 7345
Blade speed (m/min) 15 - 400
Blade twisting angle(°) 0
Motors (kW) Saw blade 22
Hydraulic pump 3.7
Coolant pump 0.25
High pressure coolant pump 1.3 / 1.5
Wire brush 0.4
Chip conveyor 0.1
Saw head 1.0 (AC servomotor)
Material feeding 1.0 (AC servomotor)
Feeding vise stroke length (mm) 600
Table height (mm) 940
Power requirement (kVA) 60
Allowable load (Mass of work) (kg) 1100
Machine dimensions (W x L x H) (mm) 4309 x 2707 x 2354
Mass of machine (kg) 8000

* The unloading device is required, when the product length is 200 mm or more.

 

Options

  • Kicker type carrying-in system (only for round material)
  • RT conveyor
  • Driving conveyor type carrying-out system
  • Product sorting carrying-out system
  • Separately placed chip conveyor
  • Mist collector

These specifications and machinery and equipment appearance are subject to change without notice for reason of improvement.
This products is for Japan domestic market.

Back To Top